HandyMax HT45C Attachments and Packages Explained
The HT45C is sold in three packages, ranging from a front-end loader and 4-in-1 bucket through to a full property kit that adds a slasher, post hole digger, combined forks, grader blade with ripper, and backhoe. The tractor runs a YUNNEI YN25GB diesel producing 33.1 kW, sits on pneumatic tyres, and suits farmers, rural property owners, hobby farms, councils, and acreage operators who want an enclosed, air-conditioned cabin.
In this photo, the blue cab HT45C with its front loader attachment is secured by chains on a flatbed trailer, photographed from the rear-side angle outdoors.
What packages are available for the HT45C?
HandyMax offers three packages for the HT45C. The table below lists each one and what it includes.
| Package | What's included |
|---|---|
| HT45C with Front End Loader and 4in1 Bucket | Tractor, front end loader, 4-in-1 bucket |
| HT45C with Front End Loader, 4in1 Bucket, 1600mm Slasher, 250mm Post Hole Digger and Combined Forks (Pallet + Hay) | Tractor, front end loader, 4-in-1 bucket, 1,600 mm slasher, 250 mm post hole digger, combined forks (pallet and hay) |
| HT45C with Front End Loader, 4in1 Bucket, 1600mm Slasher, 250mm Post Hole Digger, Combined Forks (Pallet + Hay), Grader Blade with Ripper and Backhoe | Tractor, front end loader, 4-in-1 bucket, 1,600 mm slasher, 250 mm post hole digger, combined forks (pallet and hay), grader blade with ripper, backhoe |
What are the 4-in-1 bucket figures?
The 4-in-1 bucket fitted to the HT45C measures 1,405 mm wide. Struck capacity is 0.21 m³ and heaped capacity is 0.30 m³. With the bucket attached, the overall length of the machine is 4,410 mm.
The front end loader lifts 650 kg with the 4-in-1 bucket. The three-point linkage is Category 1 and lifts 1,000 kg at 610 mm behind the hitch point. The 3PL includes a float function.
What tyre sizes does the HT45C run?
Front tyres are 280/70 R18 and rear tyres are 380/85 R24, both pneumatic. Operating weight is 2,950 kg and overall height is 2,700 mm, which is higher than the open-cabin HT45 at 2,400 mm due to the enclosed cab.
What PTO and hydraulic figures apply to the HT45C?
The rear PTO shaft is 1-3/8 inch, 6-spline, running at 540 or 720 rpm. Hydraulic operating pressure is 125 bar (1,813 psi) and flow rate is 31 L/min.
Frequently asked questions
Does the HT45C have an air-conditioned cabin?
Yes. The HT45C has an enclosed, air-conditioned cabin. This is the main difference between the HT45C and the open-cabin HT45, which shares the same engine and drivetrain.
Can I add a backhoe to the HT45C?
A backhoe is included in the top-tier package, which also covers the front end loader, 4-in-1 bucket, 1,600 mm slasher, 250 mm post hole digger, combined forks, and grader blade with ripper.
What does the combined forks attachment cover?
The combined forks included in the two upper packages handle both pallet and hay work in a single attachment.
How much does the three-point linkage lift?
The Category 1 three-point linkage lifts 1,000 kg measured at 610 mm behind the hitch point, and it includes a float function.
